Sorghum Dehulling and Whitening Machine Operation Method and Matters Needing Attention

 

With the development of technology, the development of economy, the purchase of SORGHUM DEHULLING AND WHITENING MACHINE more and more users, but there are a lot of customers due to not really grasp the correct use method of sorghum dehulling and whitening machine, causing the due performance comes out without play, not only caused dehulling out finished kernel quality is poor, and the production efficiency is very low, seriously affected its economic benefits and social benefits. Below I introduce some successful experience, for the benefit of sorghum dehulling and whitening machine promotion.

 

1. Before use sorghum dehulling and whitening machine, should first check the fastener is tightened, the rotating part is flexible, each bearing any grease, dehulling unit are placed on smooth ground.

 

2. Before use sorghum dehulling and whitening machine, should check the supply voltage switch must be in the off position.

 

3. After sorghum dehulling and whitening machine starting motor, the rotor turning and equipment in the direction of. The first few minutes idling, observation has no abnormal noise, to confirm the normal operation, can feed production.

 

4. Sorghum seeds containing skin to accumulate, can adjust the air flow into the whirlwind, increase the suction air volume, in order to achieve the purpose of skin absorption.

 

5. Precision without being separated from the seed kernel contained in exceed the standard, should timely adjust the motor and a vibration sieve surface at an angle, improve the selection effect.

 

6. The production, people from the vibration of the motor at a distance, so as to avoid wounding.

 

7. Equipment should always clear the screen surface dirt and residual grain and sundries. In order to ensure the concentration effect of sorghum. Equipment must be covered when not in use, in a dry and Treasury, to avoid the sun and rain.